denon receiver no sound This is a topic that many people are looking for. bluevelvetrestaurant.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, bluevelvetrestaurant.com would like to introduce to you How to Troubleshoot No Sound On a Home Theater Hook Up. Following along are instructions in the video below:
“Video will show you how to troubleshoot sound issues. You may be receiving with your your sony home theater. It s important to note that your speakers must be compatible the receiver in order to receive proper sound. Most sony home theater receivers.
Require speakers with an impedance of 8 to 16 ohms. And we recommend that the speakers have at least 100 watts of output power. Each. If your ohms do not match.
Or your output power is too low. It can cause one of two problems. Either your speakers will output with intermittent or distorted. Sound.
Or your speakers. Can become overloaded and get damaged. Once you are sure that your speakers are compatible check to make sure that the wires are properly connected to both speakers and the receiver. The wires should fit snugly in their contacts not loose or jittery.
If you are unsure which line is which you can mark with a piece of tape on the unexposed part of the wire and label. It with the speaker position and if it is a red or a black line. Once you are sure that your speakers are connected to the proper slots gently pull on them to make sure that the connections are snug if they re not reconnect them and try again if your speakers are binding posts. You will still need to make sure that the wires are in the proper channels and colors.
Again you can mark them with a piece of tape to label. Which the speaker wire is and if it s a red or a black line to connect to a binding post. You need to unscrew the post and insert the wire into the upper right corner behind the post. Then retighten the post and check to see if the wire is snug if not reconnect the wire and try again with your speaker s properly connected let s test.
The speaker s from the receiver turn on the receiver. And the tv. Then turn this tv to the receiver input next. We need to test the speakers.
So we will go into the speaker. Testing menu press the up or down arrow buttons until speaker is selected and then press the center button use the up or down arrow buttons to highlight sp pattern press. The center button here you will need to tell the receiver. Which way you have set up your speakers press the up or down arrow buttons.
Until you see an image that is similar to your speaker configuration once you have selected your configuration press. The center button now back in the speaker. Setting menu press the up or down arrow buttons until you highlight test tones and press the center button press the up arrow button to activate test tones as the test cycles. Stir.
The speaker s you should hear sound coming from the speaker. That is highlighted on the screen. If no sound is heard check your speaker connection and your volume and try the test again do not turn your volume up high during the test. As sudden high noise may damage.
Your speakers and ensure that it is not on mute. A moderate volume is sufficient by pressing the up and down arrow buttons in this menu you can choose to test speakers individually. Which is helpful if you are not receiving sound and need to adjust that speakers connection once you are able to hear sound from all of your speakers press. The menu button to go back to the main menu and then press the menu button to exit remember your speakers must be compatible with the receiver.
If you are still not receiving sound. We need to check the connections to your equipment check to make sure that the audio video or hdmi cables are connected to the devices you are using and that the plugs are in the proper ports since we are using the receiver as the brain of the system. The tv will actually have two cables one hdmi to send the picture from the receiver to the tv and a digital optical cable to the sound from the tv to the receiver first take an hdmi cable and connect one end of the hdmi cable out of the receiver. While connecting the other end to the tv hdmi input you will also need that digital audio optical cable now use this cable to connect the tv to the receiver take one end of the digital optical audio cable and connect it to the tv s output connect the other end to the receivers input now check that your receiver is on the proper input for your device.
Once you receive the signal on the tv place some content to make sure that you re receiving the devices audio through the receiver speakers you can do this by simply playing a dvd if you are receiving a picture. But no sound try turning up the volume on the receiver. If your receiver volume is at a moderate level. And you cannot hear any sound try using a different cable.
If your issue is still not corrected. We can check the sound field. If you are unable to receive sound press. The sound field plus or minus buttons on the receiver remote until you are able to hear sound at this point if you are still not receiving sound please visit us at esupportsonycom.
For more ” ..
Thank you for watching all the articles on the topic How to Troubleshoot No Sound On a Home Theater Hook Up. All shares of bluevelvetrestaurant.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.