mount soundbar above tv This is a topic that many people are looking for. bluevelvetrestaurant.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, bluevelvetrestaurant.com would like to introduce to you HOW TO MAKE DIY TV SOUNDBAR MOUNTING BRACKETS. Following along are instructions in the video below:
“This is techydiy and today. I am going to show you how to mount a a soundbar on top of a television. Just like this i am going to use angle for the soundbar brackets. This is n20mm squared you can buy this in diy stores easily nit comes in one or two meter lengths.
And it s pretty strong and lightweight first thing to do is to find out what mounting options are on the back of the soundbar. This is a panasonic. Soundbar and it has two threaded inserts on the back. There and these take m4 bolts.
They were included with the actual kit so looking back at the television. We ve got the vesa mount holes in this case on this panasonic tv. It s got blanking plugs in place. And once nthey are removed.
It reveals an insert a threaded insert in this case. It is m6 is the size of the thread and we need to do is find out the maximum nlength of the bolt that we can insert into that threaded insert if it s too long there is a risk that you might damage. The television nso. It s important to look up the specification for the make and model of ntelevision that you re trying to mount the soundbar non.
So getting somebody to hold the soundbar in place measure the distance between the vesa mounting hole on the back of the ntelevision and the mounting hole on the actual soundbar. So thats about 15 centimeters. So i think if i cut a length of angle around about 25 centimeters. That will be more than enough.
I am just going to measure off two lengths of the angle at 25 centimeters each. I will cut these to length with my chop saw. But you can use a hacksaw. Obviously now i am going to make the hole in the in the bracket for the soundbar.
So i have measured 25 millimetres down from the top and halfway across. I am just going to mark that position with a center punch. I am actually going to make the hole using this rather useful tool. Which is a hole punch obviously you can drill the hole instead.
Now i have got the soundbar just resting on top of the ntelevision and i have got the bracket screwed into the nback of the soundbar. I am just gonna mark the position of the mount on the back of the tv on the actual bracket. Now to try the first bracket. So i am going to put the mounting screw for the soundbar through the bracket.
I am going to put a spacing washer behind and screw that into the actual bracket into the soundbar sorry nip that up so we can still turn it i am going to put a washer behind the bracket here as well where we mount it into the television to give it some clearance. We are using allen key bolts using an allen key to turn that tight nip that up thats. Nice and solid that s worked really well i am just going to remove this top edge from the top of the bracket. So that it doesn t stick up above the soundbar thats the soundbar brackets completed all bolted up ” .
Thank you for watching all the articles on the topic HOW TO MAKE DIY TV SOUNDBAR MOUNTING BRACKETS. All shares of bluevelvetrestaurant.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.