acer ms2394 This is a topic that many people are looking for. bluevelvetrestaurant.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, bluevelvetrestaurant.com would like to introduce to you Acer ES1-512 MS2394 Open up DC Jack Socket Investigation. Following along are instructions in the video below:
“We re nearly there but astok. We are live hello. This is matt from excel excel pro tech and today. I want to be i m going to be taking.
An acer. Es. 1. 5.
1. 2. Laptop. We re going to be investigating a jack socket issue.
You and that s really weird because apparently i m offline. But it says the time live apologies. If you tuned in a bit earlier as well because we were messing around with a few things and just the youtube settings were uh seem to me off. But as you can see the chuck socket.
It s been pushed in basically. There appears to be some plastics or something like that but behind it may limit of some kind of stray gone. Awry. So we re gonna have to open.
It all up to find out investigate what s what s gone on there i m assuming as i say that there s a bit of plastic. Maybe. That s holding that that jack socket in and maybe..
That s been pushed back and been destroyed so without further ado. Let s let s open this off. Now just to warn you that if someone comes to the door. The stream might go a bit too quiet.
But i m still here i ll come back as soon as i can microphone will be off etc. Etc. Now these are these screwed quite loose. I m assuming that potentially that someone has already opened this up so only when you get laptop s now.
It is that the screws also seem to be very very tight. Unless someone s been in before you okay so generally just work your way around the outside on the bottom of the laptop taking out all screws as you see them you okay. That s one of the giveaways that someone else has been in here already there s a screw missing mm. There we go a little screw missing.
There as well you you don t all the screws seem to be about the same length. So seems to be there shouldn t be any issues. If you do so mess them up like one candidate dan i think i ve got all the ones from the outside. I ll just double check.
So then we ve also got four screws here on the inside. I m guessing that potentially they may hold down the top cover or the potentially they are holding down the mover and they re potentially holding down. Something like the way. The keyboard left of the keyboard as well cool.
That is all screws out of the half of the bomb laptop. I will just make another visual check yep. We seem to be all good there all right so now the thing to do is the the keyboards actually embedded into the into the laptop store probably..
What we re gonna do we re just gonna slowly take away the top layer so just get a thumbnail under the humvee in the gap between the top and the bottom and prize away. If you don t have a long fingernail or you don t want to do it like that what you need is either a plectrum or a pry tool. Something like this because go and and pry underneath plastics carrying my phone and i don t know why come on right. So.
It will be quite tight for these plastics. The way that they put on and also what you ve got to be aware of don t just rip. It straight up because there are if there s more than likely something underneath here that will need to be taken out so there s normally a ribbon cable for the for the keyboard. And it flattens also why i think for the mousepad.
There so you can see them there. The the one here. We ll see that the one here is the mouse pad and the bigger one look. There is the keyboard so so for the keyboard.
This is what i like to call wave. They push up so you push up on the black plastic. It s gonna be difficult for me to show you. But there s owners to plastics on the end of the of the connector just push those up and release the cable for your mouse.
There is a white thing to pull up so what i m gonna do is pull up the map and a finger. Now you can also use a pry tool or something of that sort or a plectrum just to just to get it up and we should be home free checking again for anymore cables. So push it back on the screen. And you should just be able to lift this out without any further anything else holding you back aha.
Okay. So the dc jack socket is just there and as you can see that it s just wiggling around loose. There so thankfully frozen thankfully for the customer that is just loose..
It s actually connected by a cable. Generally this is a cheaper repair than if it is soldered onto the board mike. One of these components. Here so.
Then let s just take this out and have a good good look you or might be able to butcher right so it goes underneath the it goes underneath. The cd drive the dvd drive no figure out how that comes out okay. It s just the push from the back and that will release it that s one side. What s my pry tool.
And it is just rooted how long here so yeah as you can probably just to see there the i m supposed to be a bit of plastic holding this in here. Which is gone so when we the the fun part in this repair is going to be putting. So we re gonna need to actually put some glue down to hold it in place. And when our connector is actually probably okay on this one.
It is probably literally just that we need to we need to glue it down because the plastics here of snapped. It s a bit of a bad design paul let s see if i can get this closer up to the camera you guys see so the the plastics obviously have a windows let s put it that way there are a few moves out of the way that is the you that is where the the bucket was and there even lifted up a little bit. It s a plastic holding the edges of the year and the jacks up it in so it s it s no surprise really that building common of looser those of come undone and bad design. Really they should have potentially put a a metal bracket around it just put it to leave it in place to get it sir make sure that he didn t leave it sir its socket.
Yeah just these tiny little bits of plastic. They re so thin. They re uh you can literally just snap them off with your fingernail. So probably what we re going to do i m just going to test.
It i think make sure that the make sure the jack socket is in fact okay if it is probably what i ll do what i ll do that in place and try and add something else in there just to there s stuff if moving around okay. No please. So yeah..
The the jax hook itself as you can see that if the light s gone on it is okay. It s fine so it sees it s literally just because that was pushing back you couldn t actually ensue you dc in your in the adapter into it so it was literally weather for the sake of a bit of a thick bit thicker plastics or for the sake of a little bit of metal. That went over the over the dc inboard you know this this customer. Unfortunately had to have to get this repaired.
So bad design really by a sir on that part or whichever oem. They ve got it from i m probably gonna leave it to that but for today s stream. We ve got another stream coming up later this afternoon. Probably about six o clock uk time.
Where i m going to be taking a roll and be synth. Xt and we re gonna be replacing the glass on that s as i say because this is very simple this is done this was an unplanned stream pam ll if you re just gonna glue that in place there and see if i can put anything else in there. But i won t leave you to to watch me do that i need to call costume. Anyway and just let them know what s going on so i ll hand this stream here.
Thank you very much for watching. If this has helped you in any way. I think. It s you know this has helped me to take it apart.
This has helped you to repair. They say so laptop please consider giving a donation. The servers are the dressers link at the bottom there in the description support the channel please quick to leave tip anything will be will be much appreciated. Okay.
Thank you very much for watching my name is matt from xl pontic. ” ..
Thank you for watching all the articles on the topic Acer ES1-512 MS2394 Open up DC Jack Socket Investigation. All shares of bluevelvetrestaurant.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.