htc desire 626 battery This is a topic that many people are looking for. bluevelvetrestaurant.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, bluevelvetrestaurant.com would like to introduce to you HTC Desire 626 Battery Replacement How To Change. Following along are instructions in the video below:
“Guys so today. I wanted to make a video to show you how to change change the battery in the htc desire 626. So the first thing you want to is make sure that your device is powered off so next. What you want to do is you want to grab the phone and you want to pry on this right here you want to pop this out.
And then what you can do is you want to remove the sim card and the memory card. If you have one in there. Then you just carefully pry right here you can do it with your thumbnail. If it s strong enough.
And you can just carefully work your way around just keep working your way around and the whole back lifts off just like that so next. What you want to do is you want to remove there s a red sticker right here on top of one of the screws you want to remove that and you want to remove this sticker right here so next. What we re going to need to do is use a torx size t5 screwdriver and we re going to need to remove six of these screws that are torx and then we re also going to need a phillips screwdriver size zero zero zero..
And we re going to need to remove two of these screws that are phillips. There s one on this end and one on this end. There phillips so you have to make sure to lay these out in the right order. So you know exactly how you took them out.
So you know where they go back in and i ll include a link in the video description for any tools that i m going to be using today during this repair or any parts that i m going to be replaced anything that i think might be helpful to you i ll include links in the video description so check them out there so now when you take all these screws out. Don t worry. These are all the same size except for the phillips screws and the only ones you need to keep supper. Really the phillips screws just remember they go here in here.
So then what you can do is what i found is the best. If you have a pry tool. That s shaped like this kind of or anything..
That s thin. You just have to be careful what i found if you start like right up here in this top corner right here. See how you can stick your thumbnail in there and it starts. Separating a little bit.
What you can do is just do something like this get this thing in here and get it started and just work your way down. And it helps if you can like pull up a little bit as your pry in like this and then just keep working your way around you can see it s unclip in here as we go then all that s left is the top here. But we got all the other sides loose. So we can just carefully lift up and this whole back comes off just like that to change the battery.
We ll want to do is first of all we want to disconnect it right here. What i want to recommend is coming in right behind. Here with something and just carefully prying up under the backside right here..
Because it s hard to get under the front at all so we have to do that and so let s disconnect the battery. There then you can use something like a plastic pry tool be careful you don t use something sharp. And you can slide under here. The battery has adhesive on this side and right here.
You can just slide under here and as it s coming loose you can help pull a little bit with your thumb and then just keep working it underneath like over here. And in under this corner. And then the battery comes loose just like that see there s the adhesive. I was talking about right there next.
We re ready to reinstall the battery and go ahead and grab this and set it down in here. The battery. Just press down..
Really well watch just antenna wire. Sometimes this pops out you want to make sure that stays in then let s reconnect the battery right here put the back frame back on just grab it set it down on here start pressing in all the way down around make sure. It s snapped in all the way around and go ahead and put all your screws back in remember. The philips screw goes here and down here.
And all the rest get all the torques t. 50. Another step. If you want to you could return this sticker.
If you want you don t need to but that s up to you to reinstall the graphic cover just grab the back cover set it down on here just start pressing it down all the way around make sure it s snapped in everywhere. If you took any sim cards or memory cards out you can put them back in at this time fire up your device and you ll be ” ..
Thank you for watching all the articles on the topic HTC Desire 626 Battery Replacement How To Change. All shares of bluevelvetrestaurant.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.