alienware alpha ram This is a topic that many people are looking for. bluevelvetrestaurant.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, bluevelvetrestaurant.com would like to introduce to you Upgrading the Alienware Alpha i7 Memory (RAM). Following along are instructions in the video below:
” ve decided to make a quick video showing you how to upgrade the memory on on your alienware alpha computer. Seduced. I purchased two kingston hyperx impacts. Eight gigabyte memory.
Which are ddr3 running an 1866 megahertz. The alienware alpha in this video is the i7 model. Which has the four seven eight five t quad quad processor running up to three gigahertz it s got the two gig graphics card which is the geforce gtx and currently has eight gigabytes of ram which is in the configuration of two times..
Four gigabyte memory sticks at 1600 megahertz and the underneath of the console. You need to remove the four phillips screws. Which are in the four corners you then need to remove the outer plastic casing from the internal chassis. There are plastic clips which hold the top to the bottom these can be prised apart with a tiny bit of effort here is the inside of the internal chassis on the left here.
We can see the hard drive under a protective metal cover. We re not going to be touching. That today..
What we need to do is we need to flip over the pc and cover off. Which should reveal the gpu and the cpu okay on the left here we have the gpu and on the right. We have the cpu. What we need to do is remove the fans and ducting.
So we can access the internal components. So if you re only operating the memory on your alienware alpha. You don t need to need to remove the writer ducting and fan..
Which would give you access to the memory. Which you can see here and the bottom right hand corner of the chassis okay to release. The existing memory. All you need to do is carefully prise apart.
The metal clip holding it in place and once you ve moved them apart just enough the actual memory card will come free you can then remove both existing memory sticks to replace them. With the note to install the new sticks. You first need to install the lower of the two sticks..
And all you have to do is carefully seat it into the connector and push it down until you hear a clip on either side once you ve installed them in memory sticks. You can then carefully replace the fans and ducting something to remember that i forgot in this video is the fact that you need to make sure all the plastic clips are fully connected around the outer edge of the plastic casing before you put in the four phillips screws and tighten those muscle. The four screws are in and ” ..
Thank you for watching all the articles on the topic Upgrading the Alienware Alpha i7 Memory (RAM). All shares of bluevelvetrestaurant.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.