how to remove ignition lock cylinder without key This is a topic that many people are looking for. bluevelvetrestaurant.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, bluevelvetrestaurant.com would like to introduce to you How to Replace or Fix an Ignition Lock Cylinder to Unlock Steering Wheel – With or Without a Key. Following along are instructions in the video below:
Hows it going doing this hole first today as promised. Im going to to show you how you can undo the steering wheel lock on your car with without a key alright so first lets say you have the key. But you either cant get it into your ignition or when you can you cant turn it so.
If thats the case you might grab yourself some wd 40 and then apply a generous amount into the ignition lock so under word of caution wd 40. Does collect some dust and debris. And it might come up your ignition locks on there even further.
So. If you dont intend to replace this. I recommend using a product called tri flow.
And thats what locksmiths recommend when looping up blocks. So next we put our key in the ignition and then we grab the steering wheel and turn it to the left or to the right depending. Which way was turned to lock.
It and then we turned the key back and forth as we try to unlock it if that doesnt work you can rock it back and forth sometimes the vibration helps unlock it doesnt work you want to grab yourself. A small hammer and then tap the end of the key as youre trying to turn it and the idea behind this is to use the vibration caused by tapping with this hammer to loosen up the tumblers that are inside your ignition lock. So in there therefore allowing you to turn the key also if you ever help or get them to rock the steering wheel back and forth as youre tapping on the key and trying to turn it that doesnt work what you a nexus to pull out on the key.
A little bit maybe a click. And then what you want to do is to give it a good whack with your hammer make sure you hit it straight on otherwise youre gonna bend your key and dont give up if this doesnt work at first and you can try a couple times. Slowly increasing the amount of force used with the hammer and if that fails well youre just gonna have to find a way to get your ignition lock cylinder out and replace it.
Without the key all right first thing you can do is to get yourself a nice heavy duty screwdriver then grab yourself a nice heavy hammer then start hammering away until you can get the screwdriver all the way in or until you can get it to where you can turn the ignition lock cylinder inside here and next. Once you can turn this you want to get it to the accessory position and then depending on where your ignition lock cylinder. Is located you either need to remove the kick panel like on this car or if its on the steering column you will need to remove these covers.
See. When you have the key. I need to replace the ignition lock cylinder.
You basically put it in here put it in the accessory position. And thats the only position that allows you to press. This pin in and then with that pin press then you just pull on your ignition.
Lock cylinder assembly. And with some wiggling you should be able to get it out there we go so basically with the screwdriver. Were destroying all the inside of this ignition lock still in there.
But thats okay since we got to replace this anyway all right so lets say you werent able to get your screwdriver. All the way in there or simply werent able to turn the ignition locks on there now if youre lucky enough to have any locks on there assembly that goes onto your steering column like this one. Here.
You can basically try to remove this top cap and then remove this assembly by undoing these two bolts these are safety bolts and basically the way you can remove these is to get a screwdriver and a hammer put the screwdriver on the side of these and then hit it until you get these to move and then once theyre loose. Theyre easy to take out heres a look so once you remove this you cant just take this whole assembly. Out and heres a look at the lock that locks your steering wheel in place.
See on this setup. With the key out this is extended out locking into place the shaft for your steering wheel. But when you put the key in and turn it it goes back in releasing the lock.
Now sometimes youre gonna have a separate assembly for ignition lock cylinder. And the ignition lock cylinder. Simply goes into your steering column.
And if thats the case. I recommend you try to drill this pin out just make sure you pick a small enough drill bit thats made for drilling metal or even better yet you can use deeper bits that they sell at your local auto parts store that you can either put on your drill or even a dremel and those work better than a drill bit and once you drill that pin out you can use a pick to get your ignition. Lock cylinder.
Out or you can drive in and screw. In there and then use a pair of pliers to pull it out when you get your ignition locks on the right you can just use a pair of pliers or a screw driver depending on your setup to turn that piece which will turn your ignition switch and start and drive your car. You should go without saying that you want to replace that ignition locks on there with a new set good otherwise anyone can just jump into your car.
And get a start and drive away and if for whatever reason. That fails well you have no choice then to start drilling into your ignition locks from there you want to start off with smaller bits. And work your way up until you can turn this ignition locks on at least to the accessory position and then push on that pin and then remove it now come on you look into repairman your first thought because sometimes they give you an exact spot on this where you can drill into and then that will allow you to remove this ignition locks on there because otherwise youre gonna have to work your way up from a small drill bit and basically drill out enough on the inside of this until you can remove it and one last thing.
If the key for your car comes with a chip inside then this procedure will work. But then youre gonna have to find someone to program that key to work with your car and thats all there is to it folks finding useful in this video. Please give it a thumbs up subscribe.
If you want to see more like it. But also consider you can assign my other videos. Ill put up on this side of the screen has video link so you can click on it.
And if you have more time check out my support page. I put a link to that right below this video and also in the description box. And you can have a say in what videos.
I make put some other perks. There alright thanks for watching ill see you next time .
Thank you for watching all the articles on the topic How to Replace or Fix an Ignition Lock Cylinder to Unlock Steering Wheel – With or Without a Key. All shares of bluevelvetrestaurant.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.