samsung galaxy s5 screen replacement glass only This is a topic that many people are looking for. bluevelvetrestaurant.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, bluevelvetrestaurant.com would like to introduce to you BEST Galaxy S5 Glass Only Screen Repair Video COMPLETE. Following along are instructions in the video below:
“Right today. I m going to show you how nto replace just the glass on on a samsung galaxy s5 this is one of the newer phones that just ncame and everything on this phone is working perfectly. Except that the glass is ncracked. Now you have a couple options.
One is just to buy the glass. Which is super ncheap. But it is very difficult to replace the second option is to buy the glass and nthe lcd combination it s more expensive. But it is much much easier nto replace.
I will link both of those parts in the video. Ndescription below. And you can choose what you want to do i am using some playing cards a screwdriver nand some tweezers to finish this repair. I m going to pop off the back cover of the nphone and then underneath this little plastic piece right here there s a little ribbon cable nthat.
We re going to disconnect this ribbon cable goes to the home button non. The galaxy s5. I m going to pull out the battery pull out nthe sim card and i m going to use a hot plate in order to heat my phone up to the right ntemperature in order to separate the screen from the rest of the body. I like to heat it up to about 97 degrees celsius nwhich is about 206 degrees fahrenheit.
There are a couple different ways that you ncan heat up the phone one is with a heat gun so go ahead and click nthat top video. If you want to watch how to remove the screen with a heat gun or you ncan watch the three common mistakes that people make when removing just the glass. I would recommend watching both of those videos nif you re serious about this repair. I m going to use a knife to get started up nin the top corner and then slip my playing card inside and this is just going help separate nthe adhesive from the phone body itself.
I m not going to go too deep into the phone njust. Yet because there are two important ribbon cables that are inside of there and nif you go too far you re going to rip them so make sure to watch farther ahead in the nvideo. As well to see where those ribbon cables are and make sure you avoid them. Because if nyou do rip them you ll have no option.
But to buy the more expensive part. I m leaving the cards in there as i slide nthem in so the phone doesn t re adhere to itself. Now that it s cooled down a little bit. I m ngoing to go ahead and put it back on the heater.
The hot plate that i have and once it s heated nup for a minute or two. I m going to get back at it again once i have all the sides separated. I m going nto use my red pry tool and slide it into the phone to separate the adhesive that s holding nthe lcd down to the back of the phone as well the lcd to this phone is actually surprisingly nresilient it doesn t break very easily. I would be very careful.
Though as you re sticking nthe pry tool down to not damage any of those ribbon cables. This one right here is one i m disconnecting nfor. The lcd and that s where it connects to the main board and then you can see as i m pulling up the nscreen from the phone. The little ribbon cable that goes to the home button is also pulling nthrough that back hole.
I m going to heat up the screen again so i ncan pull up this last little bit the only thing that s holding the screen onto nthe phone right now is the cables that are in charge of the back button and the menu nbutton so i m going to scrape those off the front glass. With my knife. And then kind of npress them down into the phone. So that they don t rip and they don t get in the way for nlater now for the menu button and then i can just twist.
The phone off of nthe adhesive and pull it off of the main body this right. Here is the lcd and glass combination. If this is the part that you re going to buy nyou can just go ahead and reattach that right now and clip it back into place. But if you re going to attempt to do just nthe glass repair then i ll show you how to do that right now as you can see from the heat.
And the prying nwe almost separated the lcd from the glass you can see the glue kind of separated away. I m going to go ahead and test. The phone right nnow to make sure everything is still working looks like it all turns on and functions..
Everything s working great so i m going to nuse my hot plate again set the screen down on top of it and let it warm up for a couple nminutes remember that you can use a heat gun and a ntemperature sensor. I ll link these in the video. Description below and those will accomplish the same thing that nthe hot plate. Does now that the screen is heated up to the right ntemperature.
I m going to use my playing cards again to separate the glass from the lcd. And you can see as i go in the glue just kind nof separates you ll see it kind of streak down the edges of the lcd. As you kind of pull nit away also keep in mind that there are a million nthings that can go wrong as you re doing this so you do this at your own risk. And remember nthat you might need to buy the more expensive part anyway.
If something goes wrong and your nlcd stops working. I m going to put this screen up every time ni reheat. The phone just to remind you what temperature it needs nto be at you can see that the glass shards on this nphone will come away individually. They re not laminated like they were on the ngalaxy s4.
I kind of liked that about the s4 because the screen is so thin the window nof opportunity that you have to pull off the glass is relatively small because the screen ncools down so quickly and when the screen cools down the glue is nnot as liquid between the glass. And the lcd and is much harder to separate. If your phone has less cracks in it it will nbe easier to pull the glass away this phone was pretty obliterated. So it makes nit more difficult anyway still continuing on with the removal nof.
The glass. If you re getting bored of this whole process and watching me do it you can ngo ahead and skip to around minute 8 or 9. And that s when i start to re adhere the new nglass to the lcd. Using the uv light and the uv glue.
So that s pretty interesting anyway each time your phone cools down. You nneed to make sure to heat. It up to the right temperature again and a couple things to nbe aware of if you overheat your phone you re going to ndiscolor the lcd also when you re pulling away the glass shards nfrom the body of the phone. If you pull up one edge of the shard while the other shard nis still adhered to the lcd.
It s going to put a lot of pressure on the lcd and could npossibly crack. It so you have to be super careful with that now if you feel like you ve learned anything nor. If you ve just enjoyed watching this video. I would appreciate it if you d subscribe to nmy youtube channel.
I do put up videos pretty much every week usually related to cell phone repair or automotive nrepair. You know fixing something here. And there jerryrigeverything you can also follow me non instagram zacksjerryrig. It would be fun to see you around also while you re doing your own repair.
If nyou think of any more hints or things that i left out of this video make sure to leave nthem down in the comments below for other people. It s always good to have a group conglomeration nof ideas when attempting a project this hard anyway continuing onward with the cards ni m just going to go around the edge of the lcd super slow you know slow and steady nmake. Sure you don t break anything i would say that this whole entire project ntook me about two hours two and a half hours. If you re just planning on doing the lcd and nglass swap.
Which is the more expensive part. I would say the process would take about twenty nfive or thirty minutes removing the glass is a little more complicated nand you want to take your time just. So you don t have to spend the extra money on the nwhole part itself. Anyway.
We re getting closer here. All the nbig shards are pretty much taken away. I m going to head it up one more time you have about a thirty second window. Just nbecause.
The glass is so small and so thin. It doesn t retain heat. Very well so it cools ndown..
Very quickly and that makes it harder when you re trying nto keep the glue liquid. So you can separate the glass from the rest of tth phone anyway now that there s just little shards nleft. I ve found that it was easier to go on a kind of sawing motion with my card. I would just run the edge of the card down nalong the pieces of glass and it would almost twist them out instead of lift them up if nthat makes sense you can kind of see me do it here in the video for those of you in the future who are going nto attempt this without a temperature sensor to tell you what temperature.
The phone is nat. You re going to want to heat. It up to the point that it s too hot to touch comfortably. You won t be able to rest your finger on it nfor more than maybe a second at a time and then you ll know that the glue between nthe glass.
And the lcd is ready to be separated. Anyway. As you can see the whole slicing motion nwith. The card works pretty well to get the little shards off.
I m just going to town non those right now. I m brushing away the little bits as well nthe to keep the screen as clean as possible this last little bit went pretty quick. I have this whole process sped up right now nto about 400. So it s 4 times faster than how i normally did it all right now.
I m going to make sure i didn t nbreak anything on the screen pop the battery in plug it in and it looks like everything s nstill working so i m still good to go with just the glass repair now if something wasn t working at this point nyou re going to have to buy the more expensive part and roll with that now right here in order to get the rest of nthe glue off. I ve found that the easiest way is to just kind of roll. It off with my fingers. You can see that i m just pressing up against nit and just rubbing.
The glue off in little rolls as i go down. And this gets the big chunks nof glue off that won t come off with the denatured alcohol that i use once the main chunks are ngone you can see me have a little rag right here nand. I m just using the denatured alcohol to get rid of the rest of the residue off of nthe lcd. Pretty straightforward now i m going to put the home button back nup just so i can use it to line up the glass.
As i position it on top of the lcd. Again it makes it a little bit easier. This is the uv glue. Some people call it loca.
It s the optical grade ultraviolet adhesive. I ve linked it in the video description below nso. You can check that out and get it there with the uv glue. It s a little bit easier nwith.
The galaxy s5 than it is the s4 because the runoff glue just ends up on the paper. Ntowel below. You you want to put the glue on just like this nso that when you place the glass on it it will run towards the edges. And you ll see why in just a second here s the glass once again you can find these in the video ndescription below.
I ll link all the parts you need down there and i m going to go super slow with this the slower you go the less bubbles. You ll nhave under your screen. I lined it up with the home button. And i edge of the screen and slowly lowering it ndown on the glue you can see how the glue acts once the glass ntouches it i put my pair of tweezers under the glass nand.
I m still just going to lower it down. If you do it any quicker than this bubbles ncan form in the glass. And it s super difficult to get them out you have to kind of push them toward the edge nof the screen. It gets a little bit annoying.
So just go slow and steady just like the nrest of this repair. Now that the glass is fully dropped on the nscreen. I can take my finger and press right there in the center of it and that ll make nthe glue run toward the edges kind of sweet how this works just press..
Where you want and the glue goes nout. The nice part about this is that as i m pressing nit down the glue is going to kind of suction. The glass to the lcd and this is super important because when i m ngoing to line up the lcd with the glass. I can just lift the whole contraption up off nof.
The paper towel flip it over and make sure that the edges of the phone as you can nsee. The black line around the edge of the copper. There is equal on both ends. That s how you know the lcd is correctly positioned nin.
The glass window. So you won t have any lapse or gaps in the nlcd. When you re putting it back together. I m going to flip it over one more time and nmake sure that it s completely lined up as well with the bottom.
And you can see that the glue seeped out the nedges. This is totally normal and i ll show you what to do with that in na second k. So here s the uv light once again. I ll put this in the video description nbelow.
If you need to buy it and you would use this for any type of repair in the future. Uv glue is a great way to replace the glass non your screen. It s not even very expensive anyway so i m going to go ahead and just nbrush over the top really quick and this will kind of get it tacky underneath. The nwhole process.
Only takes about a minute or two for the glue to completely cure. I m just going to rest. The light on top of nthe phone and let it sit there for a little bit. Now that that s done.
I m going to take a nlittle rag and wipe away the excess glue along the edge of the phone making sure to get nboth sides down around the button. And then i m going to over it with the uv nlight. One more time just to cure any glue that might have seeped out from around the nedges and this will make it so you don t have any nexcess glue inside of your phone. Which is nice now i m going to test it and make sure everything nworks going to clip that screen back in put the nbattery in and it looks like we re good to go everything is 100 functional.
So the only nthing. We have to worry about now is making sure that the glass well the whole screen nunit itself can be adhered back to the phone body. I all right so this is the double sided sticky ntape. I will link this in the video description below as well and i m going to just go to ntown on the inside of the phone and put the sticky tape everywhere.
I would make sure to focus on the edges of nthe phone as well as the top making. Sure not to cover anything important like the cameras nor. The home button and right now i m going to take the back button nand. The menu buttons the stuff that you peeled off the front glass earlier.
I m just going nto lay them in the little grooves that are already made for them that way when i put on the front glass. I don t nhave to worry about it i m going to take off the paper from the double nsided sticky tape and prep. The screen to be positioned back into place. Remember the little ribbon cable that goes nthrough this back slot just kind of feed that through to start off with plug the screen in make sure that it s working everything s functioning well so i can just ntake the screen and press.
It back into place making sure that it s completely stuck down nalong the tops the edges and the bottom. I m going to clip. The ribbon cable down onto nthe main board underneath that little plastic bracket thing and snap the back cover in nplace and there you go whether you did just the glass repair or you ndid the more expensive part which is the lcd and the glass either way it is a very nimpressive repair thank you very much for watching my videos. If you have any questions make sure to leave nthem in the comments below and don t forget to hit me up on instagram facebook twitter nor google they ll all pretty much be above plus.
3. So you ll get that plus 50 from in most of your cities. Then i think that rationalism can be a worthwhile policy as well..
But if you do have smaller cities. And you have quite poor campus district. Adjacency. Then rationalism can be a near useless policy cars.
I wouldn t necessarily recommend running it if you re playing free rise and fall. Though and you just straight up get that plus 100 from plus 100 yields from your campus district buildings. Then i would definitely recommend rationalism because it is easily one of the best scientific policy car in the entire game. So that is it for the campus district hopefully.
I didn t miss anything if you have any questions feel free to post them in the comment section below also feel free to check out our community discord. If you have any further questions or would like to you know just get engaged with the saxy gamer community. And maybe organize some multiplayer and just interact with the other people link is in the description below. But thank you for informing.
I have been the saxy gamer. If you enjoyed the video feel free to like if not feel free to dislike you re looking for more civilization. Six content viii over to subscribe thank you for watching and s where i m supposed to go i guess hmm what a very difficult puzzle. I wonder if it s maybe got something to do of the places with the massive green arrows pointing to them mio under.
I guess i guess i got to go and jump up into these it s gonna pull them down or something am. I i pushed it in i was opening up i thought i had to do all of them i lit the whole building just lift it up okay let s go try and pull one of the other one shall. We i think i can just off hop my whole way around and then if i drop down there there we go i mean. I was it oh is that is it me is that mr incredible.
I think it s just like a general superhero. It s like these like they re the statue of liberty isn t it for just a superhero version a better version right. How do i go into the top ten can i claim up here. I guess yeah here we go.
But i ll go to the roof. It this was once the site of a state of the art headquarters for all the local supers. I think with a little work and my inspired designs we can make it presentable again. Know what s wrong with it looks awesome how is this not presentable looks.
Amazing um. How do i how do i get up here. Then. Though that s the that s the the only little thing on my mind was there any places.
Where i could get up to it i mean that s all here we go i think i think that s why i ve been where i was at the beginning. I wanted to go around to get all of the little red orbs right there anymore round here. I can see some just all floating in the distance. Maybe.
I ll be able to pick those up a little bit later on once i ve got my hoverboard anyway. There s one here and i guess if i jump down that hole then maybe that s gonna take me inside of the the superheroes agency. Sadly though are those gonna end this video here hopefully you enjoyed it i m certainly looking forward to what the rest of the the incredibles playset is gonna bring to us. I see yeah they ll be a link in the description to part two of this let s play now.
If you want to carry on watching. But if not no worries thanks for trying out anyway and so yeah hopefully fingers crossed. ” ..
Thank you for watching all the articles on the topic BEST Galaxy S5 Glass Only Screen Repair Video COMPLETE. All shares of bluevelvetrestaurant.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.