ipod classic headphone jack This is a topic that many people are looking for. bluevelvetrestaurant.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, bluevelvetrestaurant.com would like to introduce to you iPod Video 5th Gen Headphone Jack Replacement One Ear Sound GadgetMenders.com. Following along are instructions in the video below:
“Are performing this repair at your own risk. We cannot be held responsible for any any injuries or damages. Done to your device while attempting to repair in this tutorial ll be demonstrating how to replace the headphone jack on an ipod video 5th generation this particular model is a 30 gig the video comes in 60 and 80 gig capacities as well and the process is identical. However.
It is a different size part so please be sure to order the correct part if you re looking to do this repair this repair will solve the issue of music playing out of just one of the two earbuds music is not playing out of either ear bud. Chances are the issue is with the logic board. A common issue with a 5th generation model. Replacing the headphone jack will not solve your problem.
Thank you look at the part. This. Part is available on our website gadget menders comm. We also offer a full line of parts for other models as well as service.
So if this is something you don t feel comfortable doing on your own feel free to send it in for repair. You ll need a case opener to a small phillips screwdriver as well as a small flathead screwdriver in order to complete this repair go ahead and get started. We re going to apply it slight pressure on the back center in order to allow the back casing to come slightly away from the front allowing us to wedge our tool in there we ll slide our case opener tool along one half of the ipod releasing the clips and this will allow us to remove the back casing for the front now be careful. Because there is battery cable.
Still attached near the bottom. So i ll zoom in for you because. This is an extremely important part. This is where a lot of people will damage their ipod beyond repair.
You don t want to remove this entire port you just want to gently lift up on the brown clip. Which will sit in place it just releases a tension between the battery cable allowing you to slip out of place. You don t want to remove the port completely. Because you can damage your ipod beyond repair.
Now that back case will open to the left. And the headphone. Jack cable is still attached to the logic. Board will remove these rubber bumpers.
So that it s easier to flip the harddrive back and now we ll again zoom in because we have another clip to undo that s holding the headphone jack and hold switch cable in place. You want to gently lift up slide your flat head underneath of the brown clip and lift it in the vertical direction. Releasing the tension. Allowing us to remove the cable.
Once we remove that cable. We can set the rest of the ipod aside and deal strictly with the back metal plate. Which is still holding the battery and headphone jack now it s not a bad idea to replace the battery. If you re replacing the headphone jack or doing any kind of repair on your ipod.
If it s open might as well replace the battery. They re cheap and each one only has a finite number of charges per lifetime. Ok so now we have a total of four phillips screws that need to be removed in order to remove the headphone jack and hold switch assembly. You with these screws removed.
We can go ahead and remove phone jack and hold switch cable. We ll grab our new one you and we re ready to screw that back in place once all the screws are intact. I m going take our battery reinsert. The battery you want the cable facing up as shown here and now we re ready to plug the headphone jack and hold switch assembly back into the logic board.
We ll get it closed up on that and you want to insert the cable into the port and then flip the latch downward next. We re going to go ahead and put the hard drive back in place just flipping it back making sure. It s tucked in properly. We ll take our rubber bumpers and put those back in place.
And now we re almost ready to close up the ipod. But before we do that we still have to reconnect the battery. I ll get down there close up on that and in order to do this we take the cable put it into the port and then we re just going to apply a downward force on the black clip. Which will lock that in place now we re ready to close up the ipod you want to apply an equal force on all sides of the ipod and our repair is complete ipod looks good we ll power it on if you have any questions.
Feel free to comment. Or contact. Us through our website. Gadget.
Mendes comm. Where you also find a full line of parts and toolkits for the ipod. ” ..
Thank you for watching all the articles on the topic iPod Video 5th Gen Headphone Jack Replacement One Ear Sound GadgetMenders.com. All shares of bluevelvetrestaurant.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.