how to clean a dyson This is a topic that many people are looking for. bluevelvetrestaurant.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, bluevelvetrestaurant.com would like to introduce to you How to clean and maintain the Dyson V8 Cordless Vacuum Cleaner. Following along are instructions in the video below:
“In this video i ll show you how clean and maintain the dyson v8 cordless cordless vacuum cleaner it doesn t matter whether it s the v8 animal v8 total v8 fluffy or the v8 absolute all of them are pretty much the same apart from some of the accessories. They come with so let s get going first of all what you ll want to do is to actually enter the bin on the cleaner and this is really easy to do all you do is get the handle at the top and you pull it like that then all the dirt empties out what we want to do before we carry on playing in is to get rid of this so now that we ve emptied. The bin. What want to do is to take this part off it is very easy.
What you need to do inside. Here. There s a red button. All you do is press that it s a little bit fiddly.
It and then carry on pulling out. And then that will come off and we ll work on that in a moment. So to take the bin off all we need to do is have a look underneath. And you ve got a red switch.
There just press that and then pull the whole bin down. And that just comes off like that the first thing to do is to give it a rinse under warm water once you ve done this let it dry ideally overnight. Now the next bits clean is the filter on the top that just pulls out there and again with this just give it a rinse under warm water before we put it back together it has to be dry and there s a next bit to clean is the filter on the back that just twists off so with this again it s just designed to rinse under warm water and let it dry if we put it all back together and once you ve fully dismantled. It then that s pretty much what you ll be left with and best thing about this is to get a paintbrush and you just brush around inside.
That s where the motor is and a lot of the mechanisms and again that side hopefully should be nice and clean in there just do around the seal on the back and just make sure it s nice and clean when it comes to the accessories..
These are important keep clean as the main vacuum cleaner first of all this is the fluffy head which it comes with the absolute and the fluffy model. But not the animal literally all you do to take this apart if you have a screwdriver flat headed one to hand then just put it in the side there and twist. It and then what happens is that part will just pull down like that and then it comes off and that will come off easily you can just rinse it under warm water the same with that part and with the rest of it recommend not putting this in the water. But just get a paintbrush just brush it all to make sure it s nice and clean and put that back together all you do is get the main put it on there and the small accessory so that just slots in the side clicks.
In there that just pops on the side. There to finish that off twist that and that one s done now this is the main motor head slightly easier to clean than the fluffy head just get a screwdriver put it in the side and if you twist that just pulls out again with that you can just rinse it under warm water and just make sure it s fully dry before you put it back together and inside here again i wouldn t recommend putting this under warm water because there s quite a lot of intricate detail in here. But just get a paintbrush and just make sure. It s all clean.
Then once you ve done that then to put this back together just put that on the side and you just locate that get the screwdriver and away you go now with the mini motorized brush..
This is the smaller accessory again it s very easy to clean all you do is get a screwdriver put it in the side and that twists and take that off little bit fiddly to get out. But that just pulls out like that just rinse it under warm water and again with that just get a paintbrush make sure it s nice and clean inside once this is dry just pop that back in the side and put that on get your screwdriver twist and away you go again when it comes to cleaning. This part dyson don t recommend getting any of this wet or washing any bits. So really what we recommend when it comes to cleaning.
It is just to get a brush and just piece. A newspaper and brush round the edge just to get any dirt off. But when it comes to the inside here as you can see you can actually get a lot of dirt in there so first of all what you can do is that rubber seal at the bottom that just pulls off also the seal around the edge. It is a little bit fiddly that does also come off so you can really get in and give it a good clean.
But when it comes to the inside..
Then just brush around in there and as far as the inside here. What we recommend is try to get a long thin brush and put it all the way in and try and get the dirt out because a lot of dirt can accumulate in there. But again wouldn t recommend washing that in there because chances are you won t be able to dry it properly and then once you ve done that just put the rubber seal back on the bottom. And put the other seal around the edge.
And then you re ready to start putting it back together okay so once everything is dry. Then just locate those two parts with the bin that s it just clips into there and then that will just if you just locate it you can just see the two sections there just locate it back in that pushes in and then you can close the bin. If you get the filter on the back that one there and just make sure that s properly dry and then that will just drop in the top ” ..
Thank you for watching all the articles on the topic How to clean and maintain the Dyson V8 Cordless Vacuum Cleaner. All shares of bluevelvetrestaurant.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.