genelec 6010a This is a topic that many people are looking for. bluevelvetrestaurant.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, bluevelvetrestaurant.com would like to introduce to you Genelec 6010, 8030, and 8240 Studio Monitors. Following along are instructions in the video below:
“This is paul stewart from genelec here today at front end audio. Where we reviewed reviewed a few of our project products. We brought in some of the a smaller of my amps starting with the 60 10 desktop speakers. Moved up to the 80 30.
And then what looks like an 80 40. Which is our six and a half inch by amp product is actually the 80 240. Our dsp series of speakers. Some of the topics.
We were talking about today was actually about positioning your speakers properly in the room to get the best benefit of the performance..
And as you can see here we re sitting on a table. Nothing would be having a speaker stand and having set up correctly that way. But with some of the benefits of the tools on our products that allow you to help calibrate. The speaker you can see on the back of the speaker.
Here. We have tools switches here dip switches that allow you to calibrate this speaker. Using base tilts and base roll offs to give it a better response in its listening position and moving up to our larger dsp products. You can see the network connections over here that would connect here to this network box.
Which then connects to the computer..
We also have a calibration microphone. Which has allows us to do the calibration for the listening position that with the added software can give us a first hand view of what our room looks like at the listening position and calling up the software. We already did some calibrations in this room. I use a function called auto link which allows me to use a quick key to open up a given file.
So here we have our listening position you can see our main page here and if we move into the acoustic settings page. You can actually see what we ve done to calibrate our. What glm has done to calibrate the speaker to it s listening position here. We see a view of a graph that shows three lines.
A red line..
Which was the initial response. The blue line here indicates the notch filtering. That was used to bring the levels down. And the green lines.
Here is the optimized target. And then the other function here was with the auto link was allows us to move between the multiple position. So. We ve also calibrated for a producer position.
So if i hit shift f2..
I ve now moved to my second position instantaneously and as we can see from the editing page that we have much more low end build up in that position. Where you usually see it in the back of the room. Notice that we have at about 50 hertz. Just about 25 db.
Of gain. So it s it s done a pretty good job of getting that position linearized as genelec carries a full range of monitors from the smallest to very large including subwoofers for all our products for more information check out wwf renan audiocom. And thank you for your time. ” .
Thank you for watching all the articles on the topic Genelec 6010, 8030, and 8240 Studio Monitors. All shares of bluevelvetrestaurant.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.